Repair ZIL-5301
Checking the tightening of the cylinder head mounting bolts
Check the tightening of the cylinder head mounting bolts after the break-in period and every 40 thousand km of run on a warmed-up diesel engine in the following order:
To install the winch, you need to weld a frame from a channel or angle of this type
On the frame, we install a shaft with bearings for the cable and guides for the cable
Diesel smokes (black smoke)
The first thing you need to pay attention to is the condition of the dust filter, if it is clogged with black soot, disassemble it and throw out the inserts (the filters themselves)
ZIL-5301 vehicles and its modifications are equipped with an alternating current generator mod. 2022.3701, ZIL buses are equipped with an alternating current generator mod. 3882.3701
To disconnect the rear axle without springs, the car must be placed on a flat horizontal platform or on an inspection ditch equipped with a lifting device
Master brake cylinder of the drive, divided by axles
The injector is used to inject and atomize fuel supplied to the diesel cylinders.
The MMZ 245.12 diesel engine uses a closed-type injector with hydraulic needle lift control
