Repair ZIL-5301
Bleeding air from the ZIL-5301 clutch control system
The hydraulic system of the clutch control mechanism consists of a master cylinder, an actuator cylinder with a pneumatic booster, a flexible hose and a pipeline
ZIL-5301 control output valve
The control output valve (Fig. 1) is designed to check the pressure using control and measuring devices, as well as to select compressed air
When repairing, the front axle beam must be checked for bending and twisting on a device (Fig. 1), which is installed on the spring platform
Maintenance of the heater is divided into the following types:
- - daily maintenance (DM);
On ZIL-5301 cars and buses manufactured before 01.09.01, an electric motor 351.5205 and a washer mod. 11.5208 with an electronic control unit mod. BUS 1.92.3761, located in the cabin under the instrument panel on the left side of the driver next to the hood release handle, were installed to drive the windshield wiper.
The ZIL-Bychok is equipped with a leading rear axle with a single-stage hypoid final drive (Fig. 1)
Adjusting the preload of the pinion bearings on the ZIL-5301 vehicle
The tapered roller bearings of the pinion must be adjusted with a preload by selecting adjusting washers 9, of which two pieces are installed.
