Repair ZIL-5301
The oil-moisture separator is designed to clean compressed air from moisture and oil, and to prevent condensate from freezing in air lines and pneumatic drive units.
The signaling device is designed to warn the driver about damage to one of the circuits of the hydraulic drive brake system
A two-section brake valve is used to control the actuators of the vehicle's service brake system. The two-section brake valve is mounted on the front shield of the cabin.
Wheel speed sensor and ABS electronic unit ZIL-5301
Wheel speed sensors are designed to determine the angular velocity of the wheels and transmit a signal to the ABS electronic unit
The injector (Figure 1) is designed to inject fuel into the diesel cylinder and ensure high-quality fuel atomization
The diesel engines use CRIN2 injectors manufactured by BOSCH (Germany).
Assembly of the pressure plate should be carried out in the reverse order of disassembly, on an auxiliary flywheel used as a device, placing a steel disk with a diameter of 300 mm and a thickness of 9.8 mm under the clutch pressure plate to adjust the position of the levers
When determining the condition of the rear axle by noise, you should make sure that the sound is coming from the axle
