car UAZ-3151

Repair and maintenance of the front axle UAZ-3151

The main gear and differential of the front axle are similar in design to the rear axle

The air filter (Fig. 1) is a dry type with a replaceable filter element made of synthetic non-woven material, installed on the engine on the right side in front of the carburetor and connected to the latter using a rubber coupling, secured to the carburetor with a wire clamp

Repair of the camshaft and replacement of its bushings UAZ-3151

Restore the required clearances in the camshaft bushings by grinding the shaft bearing journals, reducing their size by no more than 0.75 mm, and replacing worn bushings with semi-finished ones, followed by boring them to the size of the ground journals.

Maintenance and adjustment of the UAZ-3151 clutch

The clutch (Fig. 1) of the car is dry, single-disc, with hydraulic release.

Parts and kits of nominal and repair sizes of the UAZ-3151 engine

Table 1

Part or kit number – Name - Nominal or repair size (diameter), mm

Transistor switch type 131.3734 or 90.3734 is installed on the car on the left mudguard behind the battery