car UAZ-3151
Disconnect the wire from the negative terminal of the battery.
Install the piston of the 1st cylinder in the idle position. compression stroke.
Restore the normal size of the gaps between the pads and brake drums and reduce the pedal stroke using eccentrics, in which the hexagonal heads of the axles are brought out through the shield
The car's suspension consists of four longitudinal semi-elliptical springs working in conjunction with double-acting hydraulic telescopic shock absorbers
Disassemble the bridge in the following order:
Install the bridge on the stand (Fig. 1), unscrew the oil filler and oil drain plugs and drain the oil.
The air filter (Fig. 1) is a dry type with a replaceable filter element made of synthetic non-woven material, installed on the engine on the right side in front of the carburetor and connected to the latter using a rubber coupling, secured to the carburetor with a wire clamp
Remove and disassemble the pressure regulator in the following order:
Disconnect the lines leading to the regulator.
Remove and disassemble the main brake cylinder in the following order:
Disconnect the lines leading from the master cylinder to the warning device.
