car GAZ-2705
Usually the front beam of a car is removed when the beam bends or twists, as well as other defects that require beam removal
The front suspension consists of a stamped I-beam connected to the steering knuckles using pins
The timing mechanism is driven by a toothed belt 6 from the crankshaft pulley 1
The toothed belt is tensioned by the eccentric bearing of the tension roller 5
In order to remove the fender, you must first remove the front turn signal, turn signal and bumper
You don’t have to remove the bumper, just detach its side part.
We replace the brake disc if cracks or severe scuffing appears on its surfaces, as well as if it is worn to a thickness of less than 19 mm
Removal and installation of the crankshaft ZMZ-402 of the GAZ-2705
Remove the oil pan and crankcase gasket.
Remove the oil pump.
Removing the lock of the right rear door of the car
Use a screwdriver to pry up and open the door handle plugs
