car GAZ-2705
Main main gear malfunctions:
- - The rear axle gearbox bearings are worn out, their preload is broken, the fit is loose (uniform noise from the rear axle)
To remove the engine, the car must be placed on a viewing hole. The workplace must be equipped with a hoist or other lifting device with a load capacity of at least 300 kg
Radiator - tubular-tape, with side plastic tanks
The tanks are connected to the radiator frame through a rubber sealing gasket by crimping the support plate onto the flange of the plastic tanks
Adjusting the bearing clearance of the rear hub of the GAZ-2705
To adjust the bearings you need:
During the operation of the gearbox, some unpleasant defects may occur, which are directly related to how maintenance is carried out and the driver’s driving style
To maintain the exact torque of critical threaded connections, you need to have a torque wrench with a measurement range from 5 to 200 Nm
Replacing the cylinder head cover gasket ZMZ-406 GAZ-2705
Over time, during operation, the gasket under the engine head cover loses its elasticity and strength and oil leaks from under the cover
