car GAZ-2705
Checking and adjusting valve thermal clearances
For adjustment you need:
- - disconnect the crankcase ventilation hoses
Hinges are used to open the cabin door and hold it in a vertical position, and a roller-type door stop is used to limit the opening angle and fix (hold) the door in the open position
A typical electrical circuit may include a main electrical element, various switches, relays, electric motors, fuses, fuses or circuit breakers, wiring related to this element, and connectors used to connect the main element to the battery and ground bodies
We replace the brake disc if cracks or severe scuffing appears on its surfaces, as well as if it is worn to a thickness of less than 19 mm
In order to remove the fender, you must first remove the front turn signal, turn signal and bumper
You don’t have to remove the bumper, just detach its side part.
Inspect, check and lubricate the driveline
First of all, inspect the driveshafts and forks - cracks, dents or other deformations are unacceptable.
Press ball bearings 1 and, if necessary, pressed-on gear rings from the intermediate shaft
