car MAZ
Removing the water pump
- 1. Remove the clamp by unscrewing the bolts (2) fastening the pipe of the inlet water pump (1) (650.1303060)
Schemes for switching on lighting devices are shown in fig. 1 and 2
When vehicles are equipped with air suspension, an electronic control system of the ECAS type (by Wabco) is installed
Control diagnostics of the MAZ air suspension system using flashing light codes
If there are difficulties in identifying a malfunction, it is necessary to carry out a diagnostic check of the system using flashing light codes
The vehicles are fitted with a three-blade windshield wiper
The wiper is turned on by switch 1 (Fig. 1), which has three positions:
Model 182 diaphragm clutch (Fig. 1) consists of driving and driven parts, as well as parts of the clutch release mechanism installed in the clutch housing
The use of contaminated oils is not allowed.
It is not allowed to engage the gear in the main box until the selected range of the demultiplier turns on, that is, until the control lamp lights up when the slow range is turned on or until it goes out when the fast range is turned on
