car GAZ-3110

Replacing the GAZ-3110 fan belt

Loosen the belt tension (not shown in the photo), to do this, loosen the tightening of nut 1 and adjusting bolt 2 and turn bracket 3 with tension roller 4 to the engine cylinder block

We replace the clutch when the driven and driving discs are worn

Install the car on an inspection ditch or lift

The cardan gear used on the car consists of two shafts - an intermediate 2 (Fig. Cardan gear) and a rear axle 7, as well as an intermediate support 5 with a bearing 22

During the operation of the engine, some malfunctions may occur:

• - engine does not start;

Place the vehicle on the parking brake.

Install stands for the rear wheels.

Raise the front of the car and place it on supports.

Checking and replacing ball joints of the GAZ-3110 steering linkage

Check the lateral play in the hinge. To do this, set the wheels to the position where the car is moving in a straight line and rock the steering wheel in both directions