repair Niva Chevrolet
Since 2009, a bracket has been installed on the VAZ-2123 engine, on which the power steering pump, auxiliary drive belt support roller and engine oil filter are attached.
The fuel tank filler pipe and the gravity valve are made as a single plastic unit and are connected to the tank by three rubber hoses of different diameters.
The pressure regulator (Fig. 1) regulates the pressure in the hydraulic drive of the rear brake mechanisms depending on the load on the rear axle of the car
You will need: a torque wrench, a hammer, a device for installing pistons in cylinders, wrenches "10", "13", "14", "17", "19", "21", "22", "36" (or gas), socket heads "12" and "13" (or a special key for cylinder head bolts), a screwdriver, a mounting blade.
The fuel vapor recovery system units are removed for inspection or replacement if a persistent smell of gasoline appears, caused by leaks in the units and pipelines, as well as failure of the purge valve of the adsorber
The controller (electronic control unit), located under the instrument panel on the right side, is the control center of the fuel injection system
If the oil leak from under the cylinder head cover could not be eliminated by tightening the cover mounting nuts, replace its gasket
