repair Niva Chevrolet
Checking the wheel alignment angles is mandatory if suspension parts that may change the wheel alignment have been replaced or repaired
You will need: a pipe (gas) wrench, a screwdriver, a chisel, a punch, a hammer, a universal joint puller, a snap ring puller, a wire brush, penetrating lubricant (for example, WD-40)
VAZ-2123 vehicles use the ignition switch type 2123–3704005 with an anti-theft locking device, a lock to prevent the starter from being turned on again without first turning off the ignition, and a coil for communicating the ignition key transponder with the vehicle anti-theft system
Disassembling the gearbox shafts is necessary to replace the shaft parts.
Removing the gearbox is discussed in the article - "How to replace the gearbox of the Niva Chevrolet"
Disassembling the gearbox is discussed in the article - "Repairing the gearbox of the VAZ-2123 car"
Starter type 5722.3708 (Fig. 1) is a DC electric motor with excitation from permanent magnets, combined with a planetary gearbox and an electromagnetic two-winding traction relay
The torque is transmitted to the front wheels from the front axle gearbox through the right and left drives
Depending on the vehicle configuration, different schemes and options for auxiliary unit drives may be used.
