Repair Lada Priora
You will need a Phillips-head screwdriver
Disconnect the wire from the negative terminal of the battery.
When the master cylinder piston jams (due to corrosion, breakage of the return springs), incomplete release of all wheels may occur
A defect such as a "failure" of the brake pedal may also occur
The vehicle is equipped with a permanent magnet heater fan motor
Checking the efficiency of the brake system
In accordance with paragraph 1.1 of the "List of malfunctions and conditions under which the operation of vehicles is prohibited", the braking distance of the car with a single press of the brake pedal from a speed of 40 km / h should be no more than 12.2 m
The automatic transmission uses GenuineEJ-1 ATF transmission oil (supplier JX Nippon Oil and Energy Corporation) in accordance with the current "Codifier of the main and auxiliary materials used in the maintenance and repair of Lada vehicles" K 3100.25100.00018
Front brake mechanism is disc, ventilated, with a floating caliper and one working cylinder
The brake disc is cast iron, its minimum permissible thickness when worn is 17.8 mm.
Remove the front wheel from the side of the tie rod end being replaced
