Repair Lada Priora
The wheel drive consists of two constant velocity joints (CV joints) connected to each other by a shaft. The shafts are not interchangeable.
Checking the efficiency of the brake system
In accordance with paragraph 1.1 of the "List of malfunctions and conditions under which the operation of vehicles is prohibited", the braking distance of the car with a single press of the brake pedal from a speed of 40 km / h should be no more than 12.2 m
You will need: a special 10 mm wrench for unscrewing the brake pipe nuts, a 15 mm wrench.
Remove the corresponding wheel.
Clutch — single-plate, dry, with a central diaphragm-type spring
Located in an aluminum housing, structurally integrated with the gearbox and attached to the engine cylinder block
Replacing the Parking Brake Lever Pawl Spring
If the parking brake lever does not lock in the selected position, first check the pawl spring
The fuel system includes elements of the following subsystems:
This article will cover replacing clutch parts
