Repair Lada Priora
Place the car on a lift or inspection pit, apply the parking brake and turn off the ignition
Disconnect the negative terminal from the battery
Set the wheels to the straight-ahead position of the car.
Disconnect the negative terminal of the battery.
To remove the steering wheel of the Lada Priora, you will need a 24 mm socket wrench, a flat-blade screwdriver, and a 5 mm Allen key.
Disconnect the wire from the negative terminal of the battery.
Clutch — single-plate, dry, with a central diaphragm-type spring
Located in an aluminum housing, structurally integrated with the gearbox and attached to the engine cylinder block
To check the vacuum booster on a car, press the brake pedal 5-6 times
Then, holding the pedal down, start the engine
Replacing the Parking Brake Lever Pawl Spring
If the parking brake lever does not lock in the selected position, first check the pawl spring
The diagram of the rear window heating system is shown in Fig. 1.
The rear window heating element is switched on by relay K2, installed in the mounting block.
