car GAZ-3110
Replacing the radiator of a GAZ-3110 car
We remove the car engine cooling radiator for washing or for repair and replacement
The fluid in the clutch system needs to be replaced after 2 years
We pump the hydraulic drive when replacing the working fluid, as well as to remove air from the system that has entered it during the repair or replacement of individual components
To reduce the force applied to the brake pedal, a two-chamber vacuum booster is installed between it and the main brake cylinder, triggered by vacuum in the engine intake pipe
Electrical diagram of GAZ-3110
The frequency of oil changes is 60 thousand km
It is recommended to drain the oil immediately after the trip
Disconnect the wire from the negative terminal of the battery
Disconnect the wire connector for sensor 3 located behind the engine intake pipe
It is more convenient to remove the front buffer if the car is raised on a lift or installed above an inspection ditch
