repair Niva Chevrolet
You will need: a 13 mm wrench, a 19 mm wrench (two), a punch, and a hammer
Unscrew the four self-locking nuts securing the constant velocity joint (CV joint) to the flange of the transfer case input shaft
The fuel tank filler pipe and the gravity valve are made as a single plastic unit and are connected to the tank by three rubber hoses of different diameters.
Prepare the car and disconnect the negative terminal of the battery
The airbag control unit circuit has an emergency power reserve
Carry out all checks and work from underneath the vehicle, installed on a lift or inspection pit (with the front wheels raised)
The anti-roll bar is a curved rod made of spring steel
You will need: a 13 key, an 8 key, pliers, a screwdriver
You need to remove the hood with an assistant.
The gearbox is mechanical, with manual shifting, has five forward gears and one reverse gear, all forward gears are synchronized
