car GAZ-3110
Clean the air release valve on the wheel from which air will be removed from dirt and dust
The power supply system consists of a fuel tank, fuel lines, a fuel pump, a sump filter, a fine fuel filter, a carburetor with throttle and air damper drives, and an air filter.
The coolant should be replaced after two years of operation or after 60 thousand km, whichever comes first
Removal and installation of the ZMZ-402 cylinder head of the GAZ-3110
The front wheel brakes are disc, with a single-piston floating caliper (when braking, the piston presses the inner pad to the disc, and the caliper, moving in the opposite direction, presses the outer pad).
Disconnect the wire from the negative terminal of the battery
Disconnect the wire connector for sensor 3 located behind the engine intake pipe
Adjusting the installation angles and toe-in of the front wheels of the GAZ-3110
It is recommended to adjust wheel alignment angles on a stand at service stations. The adjustment should be made in the following sequence:
