• Auto-hand
    • Lada Granta
    • Lada Kalina
    • VAZ-2121
    • Lada-Largus
    • Lada Priora
    • Lada Vesta
  • separator
    • GAZ-66
    • GAZ-2705
    • GAZ-3110 (Volga)
  • Separator-2
  • Engines
    • UAZ 3151
    • Niva Chevrolet
    • ZIL-5301
    • MAZ
    • Ural car
    • ZIL-131
    • Auto PAZ
    • Kamaz
  • Separator-3
  • Systems
  • separator-4

Lada Largus repair

How to remove ignition coils on Lada Largus

The ignition system of the K4M engine consists of individual ignition coils and spark plugs for each cylinder.

How to remove and check the rear brake regulator Lada Largus

Cars not equipped with ABS have a rear brake pressure regulator

How does the K4M engine phase regulator work?

To improve the filling of the cylinders with fuel mixture in all modes, 1.6 l engines. equipped with a phase regulator of the intake valve camshaft

How to replace the fan and radiator heater Lada Largus

We remove the heater elements for inspection or replacement.

In the previous article, we looked at removing the heater control unit

How to remove the air conditioning compressor of a Lada Largus

The air conditioner compressor provides circulation of the refrigerant in the system

The compressor shaft is mounted in the aluminum front housing cover on bearings and sealed on the drive pulley side with an oil seal

Replacing the timing belt of the K4M engine of the Lada Largus

In accordance with the maintenance regulations, the timing belt is replaced every 120 thousand km of vehicle mileage or after 6 years (whichever comes first), regardless of its condition

How to remove the front suspension subframe Lada Largus

Work is performed on a lift or inspection pit

Secure the engine cooling system radiator to the front crossmember of the engine compartment with straps (technological belts)

Page 3 of 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

Select your language

  • Русский
  • Қазақша (kk-KZ)
  • Українська (Україна)
  • Español (España)
  • German (DE)
  • English (UK)