Kamaz car
The clearance in the valve mechanism must ensure a tight fit of the valve to the seat when the rod elongates due to heating and in the event of the head settling in the seat due to wear of the chamfers
Two compression rings and one oil scraper ring are installed on the piston
Compression rings are designed to prevent gases from escaping into the crankcase during compression and expansion
Disconnect the battery terminals
Using a 27 wrench, unscrew the drain plug and drain the oil from the engine crankcase. Putting the plug in place
We replace the oil seal when oil leaks from the rear of the engine, when the clutch discs become oily, and when repairing the engine
Disassembling the diesel engine of a KamAZ-740.10
Before disassembling the diesel engine must be cleaned of dirt and oil, washed with kerosene or a degreasing solution
The coolant pump is being repaired due to coolant leakage from the inspection hole
For tightening with particularly high precision (assembly of engine units, important building structures), use pointer wrenches; for quick assembly with the required tightening torque (tightening anchor bolts, tightening bolts during tire fitting), use limit type wrenches
