car GAZ-2705
Adjusting the carbon monoxide (CO) content in the exhaust gases of ZMZ-406
Adjustment is carried out on a warm engine (coolant temperature 80-90 °C) with a working ignition system and nominal gaps between the electrodes of the spark plugs
In the fuel injection engine power system, the pressure is 30 MPa (3 kgf/cm 2).
Therefore, it is forbidden to loosen the connections of the fuel lines while the engine is running or immediately after stopping it
Defection and repair of the ZMZ-405 GAZ-2705 cylinder block
To determine the technical condition and repair of the cylinder block, remove the engine from the car and disassemble it
The technical condition of the engine is constantly changing during operation
In order to remove the fender, you must first remove the front turn signal, turn signal and bumper
You don’t have to remove the bumper, just detach its side part.
Main brake cylinder GAZ-2705 removal and repair
The main brake cylinder with two successive pistons 10 and 17 and a two-section reservoir 4 with sensor 6 for an emergency brake fluid level drop indicator is attached to the cover of the vacuum booster
On a Gazelle car, steering can be installed both without power steering and with power steering
